CAR FLOOR MATS
With many years of experience we produce rubber and TPE car floor mats for passenger and utility vehicles. Our first car floor mats were made in 1955. Nowadays, they take up a substantial part of our production and we have customers from the Czech Republic, Europe and America.














MOULDED TECHNICAL RUBBER
We produce a wide range of moulded technical rubber products mainly focused on automotive industry. The product range includes particularly automotive components such as cuffs, grommets and bushings, pedal covers, covers and caps, sealing and stops. However, our products find their customers in mechanical and civil engineering and agriculture, too.
Other products include elastic rail underlay elements made of special compound developed to sustain dynamic loading. These elastic elements enable rails to distribute wheel force among more sleepers and reduce the transmission of vibrations to rail fastening systems, track bed and track surrounding.
Moulded technical rubber products are produced by vulcanisation, which gives them specific properties, particularly high quality and durability. They are very resistant to stress, chemicals and high temperatures and they are harmless.
We care about every product
Contact usEXTRUDED TECHNICAL RUBBER
Our extruded technical rubber products include particularly spray system hoses, protective hoses and sealing profiles. At the end of the production process the products are post cured, which gives them specific properties. They are used particularly in civil and mechanical engineering and electronics and automotive industry.
Contact usMOULDED PLASTICS AND TPE
We make thermoplastic and thermoplastic elastomer products according to specific customer requirements. Thermoplastic elatomers ensure greater elasticity and flexibility and enable the use of more pronounced colours.
The range of products includes particularly technical mouldings like bushings, stiffeners, sealing, vent elbows and condenser covers.
Contact usVACUUM FORMING
Vacuum forming is a simplified form of thermoforming. A sheet of plastic is heated to a desired temperature, thermoplastic melts and the molten material is then forced against the mould by vacuum into a desired shape. Vacuum forming can be used with a wide range of products.
Contact usNBC Protective Masks
We offer OM-90 and CM-6 masks and their modifications,
mask accessories and chemical protective clothing.
Our masks are compatible with:
IMITRADEX Communication Systems – ensuring easy radio communication
CamelBak Hydration Systems
Military Protective Masks
OM-90 military protective mask combined with a suitable filter or breathing apparatus protects the face and respiratory organs of the user from toxic gases, aerosols, vapours, biological agents and radioactive particles in the temperature range between -30°C and +70°C.

Advantages:
- Facepiece made of extremely chemically resistant harmless rubber
- Compatible with optical instruments
- Impact and scratch resistant eyepieces
- Quality speech insert ensuring easy communication (intelligibility over 95%)
- Filter connection on the left and right side of the facepiece
- Fluid intake ability
CM-6 Civilian Protective Masks
CM-6 protective mask is a new type of a full-face protective mask intended for use by the police, fire brigades and civil defence units, and for industrial use etc. Combined with a suitable filter or breathing apparatus, it protects the face and respiratory organs of the user from toxic gases, aerosols and vapours, biological agents and radioactive particles.
Advantages:
- Facepiece made of harmless rubber providing reliable protection
- Minimal resistance to breathing
- Large panoramic polycarbonate full-face window providing unobstructed view in all directions
- Filter connection on the left and right side of the facepiece
- Quality speech insert
- High user comfort
- Fluid intake ability


Modifications:
- CM-6M-mask with fluid intake ability
- CM-6S-mask with a silicone internal mask
- CM-6SM- mask with a silicone internal mask and fluid intake ability
Mask Accessories
Protective Filters
Protective filters are designed to trap airborne pollutants. They are used as a part of breathing apparatuses in the environments containing a minimum of 17 volume percent of oxygen. They are intended for use with a full-face protective mask.
The use of particular filter depends on the type of pollutants, gasses and particulate matter, or combinations of them.

Gas Filters:
Trap harmful gases or vapours by means of physical sorption or chemisorption on specifically treated activated carbon. Each type of a filter is designed to trap a particular group of substances under ČSN EN 141.
Particulate Matter Filters
Filter particulate matter from incoming air (dust, solid and liquid aerosols). They are marked with a white stripe around the filter container and divided into three classes according to their separation efficiency under ČSN EN 143.
Combined Filters
Filter gas pollutants, particulate matter and combinations of the above groups from incoming air. The use of particular filter depends on the type of pollutants, gasses and particulate matter, or combinations of them.
Bags
A textile bag intended for both civilian and military use. It is designed to carry a protective mask and two filters accommodated at the bottom of the bag. The mask can also be carried in a ready-to –use state with a filter on and a spare filter in the bag.
It is fitted with a shoulder strap and two belt loops. The content of the bag can be fixed with a compression strap.
The bag can be modified according to customer requirements.
Bottle
The bottle enables the user to receive fluids with a mask on in contaminated areas. Material PE, Volume: 0.8 l
Helmet Compatibility
CM-6 mask can be optionally fitted with a two-point fastening system and used with a police intervention helmet.
OPCH-15 Special Protective Suit
OPCH-05 ventilated chemical insulating suit was developed in collaboration with the companies ECOPROTECT and MALINA SAFETY according to the requirements of the Czech Army to replace the existing OPCH-90 suit. It is designed to be used with OM-90 protective mask.
OPCH-05 suit is a special multiple-use protective clothing system of insulating type intended for long-term skin protection from toxic substances in liquid and gaseous form, vapours, combat biological agents and radioactive dust.
Combined with special filters and self-contained breathing apparatus or external source of air, OPCH-05 suit can be used in industrial accidents as a protection against toxic industrial substances.
The suit consists of two main parts, a clothing part and a filter ventilation unit.
OPCH-05 protective suit can also be used without the filter-ventilation unit (unventilated option).
Clothing part consists of:
- Overalls with overboots and a hood with a gas-tight face cuff
- Rubber gloves
- Special two-piece underwear
- Air distributor with tubes
- Diaper underpants
- Cooling garment
Filter-ventilation unit consists of:
- Ventilation unit
- Power source
- Connecting hose (suit and protective mask)
- Filters (7 pieces)
- Rubber filter caps (7 pieces)
- Fastening straps and a back pad

JP-90 Disposable Protective Suit
JP-90 is a disposable suit designed to protect body surface and gear in the areas attacked with weapons of mass destruction for the time necessary to leave the contaminated area. It protects the user from coarsely dispersed aerosols and droplets of toxic substances, combat biological agents, other substances and radioactive dust. Material: PELD-PELD plastic film

Contact us
RUBBER COMPOUNDS
We produce rubber compounds for our own products and for sale, too. Our compounds are of required properties, quality and proven constant conformity. We achieve high quality of our products by observing established technological processes certified by ISO TS 16949 and ISO 900 standards.
We produce various rubber-based compounds
Our offer includes over 500 types of rubber compounds
We produce rubber compounds according to specific customer requirements for product construction and use